Bestsellers

Tersa M42 knives - sizes from 50 mm - 640 mm

Tersa HSS - sizes from 50 mm - 640 mm

Tersa Chrome - sizes from 50 mm - 640 mm

Tersa Carbide Knives - sizes from 50 mm - 640 mm

A precise and rapid means of providing a profile across the end of a timber section.

Table extension with optimal back-stroke protection when insertion moulding.

Universally usable with feeding blocks, easily attached and removed.

Aigner device to hold different devices. 40mm length Optional: 172mm available

Table extension with 830mm mounting rail only

Safe guidance of thin work pieces for the outfeed side of the Integral Fence

Indispensable when machining small unstable work pieces, with use on the integral fence

Clamping device for the efficient and safe stop milling of short workpieces.

Replacement strip for integral fence. Not the same as bottom strip

For attaching the angle bracket in T-slots of machine table and slides.

For a safe coupling of Aigner table extensions.

To deflect short workpieces and cuttings from the circular saw blade.

An important basic unit to provide a low friction side pressure on the work piece passing through (or top) the machine. Adjustment range between 5mm and 630mm with Allen key.

The Aigner mounting rail is suitable for most table sizes and is available in 5 different lengths. The rails provide fast and safe means to mount safety and working equipment on a wide range of woodworking equipment without the necessity of additional too

A support unit enabling pressure modules to be mounted on the machine table " T " slot.

The universally usable pressure element for precise guidance; simple and fast insertion into the pressure module.

Provides even more supportand pressure either side of the point of cut. Each wheel unit has lateral adjustability along the support rail for greater flexibility in positioning.

The Aigner mounting rail is suitable for most table sizes and is available in 5 different lengths. The rails provide fast and safe means to mount safety and working equipment on a wide range of woodworking equipment without the necessity of additional too

Handy help when sawing or milling circles.

Enables the pressure to be applied either side of the point of cut.

An improved work guidance and pressure system for passing work pieces across the face of a cutter head.

Table extension with 830mm mounting rail only

An excellent working unit with revolutionary features to provide accurate and safe machining on a vertical spindle miller.

The Aigner mounting rail is suitable for most table sizes and is available in 5 different lengths. The rails provide fast and safe means to mount safety and working equipment on a wide range of woodworking equipment without the necessity of additional too

Aigner bottom replacement strip for the Integral fence

Novel type fence with built in auxiliary fence for jointers. 1300MM LONG Optional: 1100mm available

The Aigner mounting rail is suitable for most table sizes and is available in 5 different lengths. The rails provide fast and safe means to mount safety and working equipment on a wide range of woodworking equipment without the necessity of additional too

An improved work guidance and pressure system for passing work pieces across the face of a cutter head.

Needed to machine curved and circular work pieces economically, accurately and with maximum regard for safety. For tool diameters up to 220MM

Novel type fence with built in auxiliary fence for jointers. 1100MM LONG Optional: 1300mm available

The optimally accessible electronic control unit enables quick and convenient adjustments of the planning height. Price is for a basic unit, please call for price quote. Sales areas are restricted to Northeast.

A further possibility for providing guidance and support.

For safe feeding of workpieces on circular saws, panel saws, narrow bandsaws and vertical spindle milling machines.

A device to allow short or thin pieces to be sawn using a work holder and side pressure.

The Aigner mounting rail is suitable for most table sizes and is available in 5 different lengths. The rails provide fast and safe means to mount safety and working equipment on a wide range of woodworking equipment without the necessity of additional too

The Aigner mounting rail is suitable for most table sizes and is available in 5 different lengths. The rails provide fast and safe means to mount safety and working equipment on a wide range of woodworking equipment without the necessity of additional too

For use where a precise finish and pressure is needed when machining coated materials in timber and plastic material.

To machine curved and circular workpieces economically, accurately and with maximum regard for safety. For tool diameters up to 150MM

The T45 CONTOUR offers world-wide unique save solutions for profiling surfaces in one pass. Price is for a basic unit, please call for price quote. Sales areas are restricted to Northeast.

For mounting the Centrex on the machine table when the size or strength of the fence housing prevents its attachment. 355 Inner width (optional 500mm)

This device enables glazing beads to be sawn from previously milled sections of window framing.

This device enables glazing beads to be sawn from previously milled sections of window framing.

The universal basic element on spindle milling machines with integrated sliding table for supporting safety and working units. Mounting rail V - II Right

An excellent working unit with revolutionary features to provide accurate and safe machining on a vertical spindle miller.

Adaptable safety guard for shaper applications

To store the Aigner cross stop at the machine.

This piece of equipment is designed for spindle milling machines where it is necessary to provide an unobstructed table for machining curved work pieces. 500MM Optional: 335MM width available (additional cost)

A smoothly running rip fence with its integrated auxiliary fence provides the basis for quick and precise working. Price is for a basic unit, please call for price quote. Sales areas are restricted to Northeast.

These are required when mounting the Centrex and supporting bridge on a machine table when it may be necessary to fold the unit away.

This piece of equipment is designed for spindle milling machines where it is necessary to provide an unobstructed table for machining curved work pieces. 335MM Optional: 500MM width available (additional cost)

This block is for use where the Centrex is to be mounted on the back of the fence structure. Please check catalog for additional sizes

Hinged auxiliary fence for surface planning machines.

For mounting the spacer on the feeder unit

For mounting the spacer on the feeder unit. The mounting plate is required when it is not possible to fasten the spacer on the feed unit in the exact height

Mounting plate with angle, needed when the shape of the feed unit housing does not allow to fasten the spacer in another way

Mounting plate with angle, needed when the shape of the feed unit housing does not allow to fasten the spacer in another way

The universal basic element on spindle milling machines with integrated sliding table for supporting safety and working units. Mounting rail V-I for left hand

An improved work guidance and pressure system for passing workpieces across the face of a cutter head.

Quality selection of used woodworking equipment and supplies

The Aigner mounting rail is suitable for most table sizes and is available in 5 different lengths. The rails provide fast and safe means to mount safety and working equipment on a wide range of woodworking equipment without the necessity of additional too

The Aigner mounting rail is suitable for most table sizes and is available in 5 different lengths. The rails provide fast and safe means to mount safety and working equipment on a wide range of woodworking equipment without the necessity of additional too

A shaper must be efficient and versatile - just like every other production machine. A modern touchscreen control is exactly what is required in today's woodworking facility; minimizing set-up times and increasing production

CURVED MACHINING GUIDE 1-1/4" BORE SPINDLE - for small Bowmouldmaster Options: 1-1/2", 30,35,40,50mm also available (additional cost)

Curved machining guide for 1-1/4" spindle for large Bowmouldmaster Options: 1-1/2", 30,35,40,50mm also available (additional cost)

Setting up a tilting shaper can be a major challenge. Not so for the T27 FleX with its modern touchscreen controller. Thanks to the controller's integrated tool conversion, the operator can make efficient use of the wide tilting range of the T27 FleX. Pri

Used on the table of the machine as a support for workpieces with more than one curve. For use with Small BowmouldMaster

An excellent working unit with revolutionary features to provide accurate and safe machining on a vertical spindle shaper

An excellent working unit with revolutionary features to provide accurate and safe machining on a vertical spindle miller.

The core of the T70 Automatic is the powerful and yet easy-to-use touchscreen control with a comfortable 10.4" screen. The control supports up to five networked axes, thus greatly reducing your tool-changing and set-up times. Price is for a basic unit, pl

This machine offers everything you would expect from a modern premium-class sliding-table saw: three controlled axes and a future-oriented, user-friendly 10.4" touchscreen control for precise settings of the cutting height, angle, and width in seconds. Pr

For fastening the Centrex and the supporting bridge to the rear edge of the machine table.